SignalWide ClickitBase direct connect amplifier kit (P/N SWCB101), includes amplifier, bag, dc cord, ac adapter, window suction antenna and 3G card adapter (Please specify what type of data card you have in the notes of your order).

***DISCONTINUED***

Replaced by a New Model found here

SignalWide amplifiers utilize patented technology under license from Motorola, Inc. The digital microprocessor, software-controlled, dual band line of amplifiers are designed to meet or exceed carrier standards as well as improve wireless reception. SinalWide amplifiers do not communicate with the carriers tower management system, therefore it requires no bandwidth increase.

The software controlled digital system will sense the presence of a wireless handset and respond in its power level to the presence of the signal generated by that handset so as to cause no interference with that signal, or confusion at the cell site.

The SignalWide RF line of amplifiers are a stand-alone pass through linear RF amplifier that uses external power. When close to a cell site it compensates only for the loss in the coaxial cable and connectors from an external antenna to the wireless portable handset. The handset has the ability to produce the power level that the local cell site is requesting regardless of the distance, within reason from the cell site.

The SignalWide line of amplifiers is not a fixed output unit. The amplifiers are bi directional, digital microprocessor software controlled RF linear amplifiers that have a large dynamic range from 30 dB to 72dB. At its lowest level,  it is approximately a 0 db gain. 

(1) Amplifier	ClickitBase Amp
(1) Power Cable	Car Lighter
(1) AC Adapter	Car Lighter to AC
(1) Interior Antenna	Suction Antenna (others available here)
(1) Connector Cable	Determined by your Wireless Card
(1) Carrying Bag	Softcase with zipper
(1)Installation Guide	Simple and Easy

 Download the spec sheet.